Experimental Study and Numerical Simulation of Green Tea Drying Kinetics using a Heat Pump System Integrated with Auxiliary Electric Heating
Ngo Quang Truong1, Nguyen Thi Viet Linh2, Pham The Vu3, Pham Van Duy4
1Ngo Quang Truong, School of Electrical and Electronic Engineering, Hanoi University of Industry, 298 Cau Dien, Tay Tuu, Hanoi, Vietnam.
2Nguyen Thi Viet Linh, Faculty of Energy Engineering, School of Electrical and Electronic Engineering, Hanoi University of Industry, 298 Cau Dien, Tay Tuu, Hanoi, Vietnam.
3Pham The Vu, Faculty of Energy Engineering, School of Electrical and Electronic Engineering, Hanoi University of Industry, 298 Cau Dien, Tay Tuu, Hanoi, Vietnam.
4Pham Van Duy, Institute of Energy Science and Environment (IESE), A9 Building, 18 Hoang Quoc Viet, Cau Giay, Hanoi, Vietnam.
Manuscript received on 11 April 2026 | First Revised Manuscript received on 16 April 2026 | Second Revised Manuscript received on 17 May 2026 | Manuscript Accepted on 15 June 2026 | Manuscript published on 30 June 2026 | PP: 1-9 | Volume-6 Issue-4, June 2026 | Retrieval Number: 100.1/ijpte.D203006040626 | DOI: 10.54105/ijpte.D2030.06040626
Open Access | Editorial and Publishing Policies | Cite | Zenodo | OJS | Indexing and Abstracting
© The Authors. Published by Lattice Science Publication (LSP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Controlling the moisture removal process in Thai Nguyen green tea drying is a significant challenge due to the complex capillary-porous structure of the leaves and the high thermal sensitivity of bioactive compounds. This study proposes an advanced hybrid drying solution that combines heat pump technology (HPD) with auxiliary electric heating to optimise drying kinetics and energy efficiency. In addition to the experimental investigation of three multi-stage temperature-control modes, a mathematical model based on 1D moisture-diffusion partial differential equations (PDEs) was developed. This model was solved using the implicit finite difference method (FDM) in MATLAB to accurately describe the moisture concentration gradient from the core to the material surface in real time. The experimental and simulation results show high compatibility (RMSE < 0.05). The data indicate that the stepped drying mode (35–40–45°C) is the optimal strategy, reducing the drying time by 27.2% compared to the conventional constant-temperature heat pump method. This strategy ensures uniform moisture distribution and effectively prevents surface “case hardening.” Among the six thin-layer kinetic models evaluated, the Midilli & Kucuk model exhibited superior performance, with a coefficient of determination (R2) of 0.9981 and an RMSE of 0.00179. The novelty of this research lies in establishing a “thermal safety zone” through a multi-stage heating mechanism, which maintains a maximum drying rate of 0.035 g/min during the critical falling-rate period. The findings confirm that PDE-based numerical simulation is a fundamental tool for optimising hybrid drying systems, enabling accurate prediction of the drying endpoint and establishing temperature profiles to preserve sensitive bioactive substances in industrial applications.
Keywords: Green tea Drying, Hybrid Heat Pump, Auxiliary Heating, Numerical Simulation, Drying Kinetics, Multi-Stage Drying.
Scope of the Article: Heat and Mass Transfer